Already use this email address dewalt 18 v xr brushless 1/2 inch high torque
DEWALT 18 V XR Brushless 1/2 Inch High Torque Impact Wrench (950 Nm), Bare Unit- 3 Speed and torque settings gives you the control to best suit your application
- Powerful fan cooled motor delivers up to 950 Nm of torque and 2400 impacts per minute for heavy duty fastening applications
- Up to 1625 Nm of breakaway torque ensures removal of the tightest bolts
- Comfortable rubber XR grip and switch for greater application comfort and maximum control
- Bright white LED with delay feature for improved visibility and flashlight functionality
- Hog Ring 18 V Lithium Ion High Torque Impact Wrench - Body Only (batteries, charger or carry case are not included)
- Hog Ring refers to the 1/2 Inch bit holder - rather than using a spring loaded socket holder the socket is held by friction; maximum Bolt Diameter - M20
- Powerful fan cooled motor delivers up to 950 Nm of torque and 2400 impacts per minute for heavy duty fastening applications
- Up to 1625 Nm of breakaway/torque ensures removal of the tightest bolts
- 3 Speed and torque settings gives you the control to best suit your application
- Bright white LED with delay feature for improved visibility and flashlight functionality
- Comfortable rubber XR grip and switch for greater application comfort and maximum control
- Latest generation 18V BRUSHLESS XR Li-Ion High Torque Wrench featuring XR 5.0Ah Li-Ion battery technology
- Powerful fan cooled motor delivers up to 950Nm of torque and 2400 impacts per minute for heavy duty fastening applications
- Up to 1625Nm of "breakaway" torque ensures removal of the tightest bolts
- LED light with 20-second delay for increased visibility
- 1/2" Anvil with detent pin (also available in hog ring)
- High power Brushless motor outputting up to 205Nm of torque ensures heavy applications are completed quickly
- Application control is achieved through 3 motor speeds and torque settings including Precision Drive
- Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage
- Super lightweight and compact the tool is very comfortable to use and fits in small spaces
- 3x LED "Halo" light ring offers excellent work piece lighting
- Sequential mode allows for precision placement and the bump operating mode provides the user with production speed of up to four nails per second
- Compact, lightweight and ergonomic design makes the tool easy and comfortable to use but durable enough for worksite environment
- Mechanical rather than gas operation offers low running costs and consistent performance at low temperatures
- Trigger and contact trip lock-off and prevent accidental dis-charge of fastener
- Tool free stall/jam clearance minimises down time
- High speed drilling performance at more than 90 holes (10 mm diameter x 80 mm) per charge
- Two stop mode: Rotation stop mode for light chiselling in plaster, tiles and render/impact stop mode for rotary only drilling in wood and metal
- Brushless motor with high capacity XR 5Ah 18 V battery platform for extreme runtime and reduced maintenance
- Electronic clutch for consistently-high torque and improved durability
- The best-in-class vibration at 6.6 m/s² to minimise user fatigue
- 18V XR Li-Ion compact hammer drill driver featuring new 5.0Ah li-ion battery technology
- Brushless motor technology for excellent efficiency
- Ultra compact, lightweight design allows use in cone spaces
- Two speed all metal transmission for increased runtime and longer tool life
- Drill driver and hammer feature for multiple applications
- 18V brushless motor for efficiency, improved application performance and power
- Capable of x69 cuts in 1/2" steel rebar when used with 5.0Ah battery (sold separately)
- Compact gear case for increased access to tight spaces and gives excellent cutting depth
- Constant clutch and e-clutch protects from kickbacks, cuts and wheel bursts
- Comes with side handle, keyless handle and blade wrench; Sound Pressure: 85 dB(A); Sound Pressure Uncertainty: 3 dB(A)
- Brushless technology
- Compact and lightweight
- Drill driver and hammer feature
- 15 position adjustable torque control, No. Of gears: 2.
- Note: Only the unit, no charger or batteries included
- The DCP580 is the first Planer to join Dewalts impressive XR 18v li-ion family
- Because it joins the XR range we can be assured that its compatible with the full range of 18v li-ion XR batteries from 2. 0Ah to 5. 0Ah
- Its also got an all new 'brushless' motor, which mean that there are no carbon brushes in this planer
- Because of this the DCP580 will have an increased runtime over other brushed cordless planers and its motor will stay in good condition for much longer, giving it a great overall lifetime.
- Brushless Motor - Increased power and runtime
- Large twin blade drum with TCT blades for high quality surface finish
- On board blade storage and torx key - for quick and easy blade changes
- Foot lock off - stands the tool above the work surface
- Air lock port - compatible with air-lock or dust bag
- Brushless Motor - Increased power and runtime
- Brushless Motor - Increased power and runtime
- Large twin blade drum with TCT blades for high quality surface finish
- On board blade storage and torx key - for quick and easy blade changes
- Foot lock off - stands the tool above the work surface
- Air lock port - compatible with air-lock or dust bag
- Latest generation 18V XR Li-Ion Brushless 18Ga dedicated flooring stapler offers the cutting edge in nailing technology
- BRUSHLESS motor offers runtime that cannot be beaten in a compact package
- Compact, lightweight and ergonomic design makes the tool easy and comfortable to use but durable enough for worksite environment
- Mechanical rather than gas operation offers low running costs and consistent performance at low temperatures
- Sequential mode allows for precision placement and the bump operating mode provides the user with production speed of up to 4 nails per second
- All metal nitro-carburized chuck with carbide inserts helps to minimise dropped bit frustrations
- 3 speed gearbox for a greater range of applications
- Larger brushless motor than previous model gives 34% increase in power
- Improved air flow to the motor
- Hammer Function increases speed to 2250rpm - Increased productivity
- 1 x 18 Volt DCD996 XR Brushless Combi Drill
- 1 x 18 Volt DCF887 XR Brushless Impact Driver
- 2 x 18 Volt 5.0Ah Li-Ion Batteries
- 1 x 10.8-18 Volt DCB105 Multi-Voltage XR Charger
- 1 x TOUGHSYSTEM & trade; DS150 Toolbox
- 1 x 18 Volt DCD996 XR Brushless Combi Drill
- 1 x 18 Volt DCF887 XR Brushless Impact Driver
- 2 x 18 Volt 5.0Ah Li-Ion Batteries
- 1 x 10.8-18 Volt DCB105 Multi-Voltage XR Charger
- 1 x TOUGHSYSTEM & trade; DS150 Toolbox
- This Dewalt Kit consists of the Dewalt DCD796 Compact Hammer Drill Driver featuring 2nd generation brushless technology for 30% more power and excellent efficiency.
- The overall length has been reduced to 174mm for an even more compact feel.
- Also included is the DCF887 Impact Driver which has 205nm of Torque, 28% more powerful than its predecessor the DCF886.Precision drive on speed 1 gives you more control on smaller screws.
- Scale for precise cutting depth setting to 65 mm
- General purpose ripping, cross-cutting and bevelling circular saw for wood and other construction materials
- High torque brushless motor for durability and power for cutting job site and Joinery materials
- Stable block construction for low vibration running and long service life
- Additional handle for safe two-handed work. Variable adjustment of the bevel angle to 57 degrees
- DEWALT Brushless Motor for extended run time, reliability & durability
- Improved ergonomic design and rubber grip increase comfort
- Ergonomic handle set with rubber overmould to optimise end user comfort
- The sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed
- Mechanical rather than gas operation offers consistent performance at temperature between -20 and 50 degrees Celsius and minimal cleaning/service requirements
- Class leading vibration and sound figures, offer fantastic user protection
- Versatile 30 - 34 degree magazine angle will accept most clipped head, and off centre round head paper tape or wire weld collated framing nails
- Reversible belt/rafter hook provides increased portability and versatility on the job-site
- Class leading vibration and sound figures, offer fantastic user protection
- The sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed
- User can engage contact trip lock-off and prevent accidental dis-charge of fastener
- Reversible belt/rafter hook provides increased portability and versatility on the job-site
- Increased visibility and durability along with protection for work-surface from the non-mar contact-trip
- 18V XR Lithium Ion Cordless Brushless 16 Gauge Framing Nailer
- The eagerly awaited successor to the DC618
- Brushless motor technology offers the power to fire a 63mm nail into soft wood and 50mm nail into hard wood
- Benefit from longer runtime, quicker readiness to fire and less recoil
- Durable magazine accepts 32 to 63mm 16Ga nails
- 18V XR Li-Ion compact hammer drill driver featuring NEW 2.0Ah Li-Ion battery technology
- Brushless Motor Technology for excellent efficiency
- Ultra compact, lightweight design allows use in confined spaces
- Improved ergonomic design with rubber grip over mould improving users
- Li-Ion battery packs allows for superior insertion and removal with state of charge indicator
- 18V XR Li-Ion compact combi drill featuring 5.0Ah XR Li-Ion battery technology
- Ultra compact 174mm Drill length
- Improved air-flow to the motor
- 2 x 5.0Ah Li-Ion Batteries
- 3-Speed Variable & Reverse
- 90min Charge Time
- DCD795 Combi Drill- Latest Brushless Motor Technology for excellent efficient and longer runtime^DCF886 Impact Driver- 3 LED halo ring joblight with afterglow for excellent visibility^DCD795 Combi Drill- Latest generation 18V XR Li-Ion compact hammer drill driver featuring 4.0 Ah XR Li-Ion battery technology^DCF886 Impact Driver-XR Intelligent switch for maximum tool and battery protection^DCD795 Combi Drill- Ultra compact, lightweight design allows use in confined spaces
- 18V XR Li-Ion compact hammer drill driver featuring new 5.0Ah li-ion battery technology
- Brushless motor technology for excellent efficiency
- Ultra compact, lightweight design allows use in cone spaces
- Two speed all metal transmission for increased runtime and longer tool life
- Drill driver and hammer feature for multiple applications
- DEWALT DCN680N Brushless XR 18 Gauge Brad Nailer 18 Volt Bare Unit
- 1 x 4.0Ah Battery DCB182
- 1 x Dewalt DCN692N Brushless Fix Nailer
- 1 x Dewalt DS400 Case
- DEWALT DCD778 Combi body
- Latest Brushless Motor Technology for excellent efficient and longer runtime
- Latest generation 18V XR Li-Ion compact hammer drill driver
- 14 position adjustable torque control for consistent screwdriving into a variety of materials. Using different screw sizes
- Two speed all metal transmission for increased runtime and longer tool life
- Powerful 18V XR hammer drill driver with high performance brushless motor
- Automatic high speed hammer drill driver at 38,250 BPM increasing users masonry drilling speed of application
- 3 position LED torch with high/medium/low settings to light up your work space
- Tough 3 speed all metal transmission for increased runtime and longer tool life
- Please note: This is a body only item and does not include a battery or charger.
- Proven reliable DeWalt technology
- Lightweight construction at just 1.24 Kgs
- High performace for the home or tradesman
- 1 x DCD795N Body Only
- Single screw drywall screwdriver 18V cordless brushless (body only)
- Led work light offers valuable light when working in small spaces or areas with limited light
- "Set and Forget" Feature remembers your fine depth adjustment setting When removing and replacing the nose cone
- Trigger lock on lets you work without having to pull the trigger
- Robust and durable design means that the tool is jobsite tough
- 1 x DEWALT DCF887N impact driver
- 1 x DEWALT 4.0Ah DCB182 battery
- [Two-way ratchet adjustment]: The two-way ratchet structure allows you to easily change the forward or backward movement of the wrench with the toggle button; fast tightening and loosening.
- [Preset Torque Value]: Set the torque value in advance, and the tool will click to remind you to stop the force when the value is reached, thus protecting the wrench and the screw nut.
- [Torque Value Locking System]: You can use the handle locking system to lock the wrench to a specific torque value to ensure that these deviations are small.
- [High Accuracy]: Each torque wrench is inspected before leaving the factory; the only check code guarantees accuracy.
- [Set list]: 1/2 inch drive wrench, 17/19/21mmsocket, 125mm extension rod, storage box.
- BRUSHLESS motor technology and XR 5.0Ah battery packs
- Two speeds - or power levels
- Benefit from longer runtime
- High capacity 5.0Ah XR battery packs
- Gas free operation offers a significant saving in running costs
- 3 LED Halo ring job light with afterglow for excellent visibility
- Xr intelligent switch for maximum tool and battery protection
- Aluminium front housing aids heat dispersion for increased motor life
- Improved 140mm back to front length increases the versatility of this impact driver
- Xr brushless motor for increased runtime and less servicing
- All-new 18V BRUSHLESS XR Compact High-Torque Wrench featuring Precision Wrench
- Powerful fan cooled motor delivers up to 447Nm of torque and 3100 impacts per minute for heavy duty fastening applications
- At just 178mm long and weighing only 1.5kg, the tool retains power whilst being compact enough to get into tight spaces
- Sequential mode allows for precision placement and the bump operating mode provides the user with production speed of up to 4 nails per second
- Compact, lightweight and ergonomic design makes the tool easy and comfortable to use but durable enough for worksite environment
- Mechanical rather than gas operation offers low running costs and consistent performance at low temperatures
- Trigger and contact trip lock-off and prevent accidental dis-charge of fastener
- Tool free stall/jam clearance minimises down time
- FAST BATTERY CHARGER
- Dewalt 18v lithium battery 2.0AH
- Latest t STAK case
- Complete Dewalt PROFFESIONAL drill kit